PS-8810 TECHNICAL SPECIFICATIONS
Front Panel Displays: A green ‘POWER’ indicator shows that the unit is plugged in and AC power is being supplied.
An amber ‘DATA’ indicator flashes when commands addressed to the PS-8810 are received.
A green ‘IQ INTERFACE’ indicator lights when the PS-8810 is being used as system interface.
A three-digit LED digital display indicates the presently selected preset number, IQ address and baud rate and also
indicates when a parameter has been stored in flash memory and, when any parameter is varied from its value
within the currently selected preset.
A sixteen-segment LED display matrix can be set to three different operating modes: Level Meter, Input Gate Status,
and Infinity Pattern (test).
Audio Inputs and Outputs:
Connectors: 3-pin male removable barrier block connectors, Euro-style cable connector supplied
Phantom Power Voltage: +24VDC at 10mA
Input Gain Range: +20dB to –12dB
Max. Input Level: +32dBu (line) or +7dBu (mic)
Input Impedance: 20 kohms balanced, 10 kohms unbalanced
Digital Sampling: 24bit, 48kHz
Dynamic Range: >100dB (A-weighted, 20Hz-20KHz)
Frequency Response: ± 0.5dB, 20Hz-20kHz
Common Mode Rejection: 50dB at 60Hz (typical)
Crosstalk: >80dB at 10kHz
Total Harmonic Distortion: <0.05% THD + N (1kHz, 0dBu)
Output Impedance: 100ohms balanced, 50ohms unbalanced
Max. Output Level: +20dBu
RS232:
Connector DB9F computer interface for both component and interface modes
Data Communication Rate: Selectable to 19.2K, 38.4K, 57.6K, or 115.2K Baud
IQ Bus:
Connectors: RJ-45 for input/output, RJ-45 for daisy output
Data Format: Serial, binary, asynchronous; 1 start bit; 1 stop bit; 8 data bits; no parity
Data Communication Rate: 38.4K Baud
Data Format: Serial, binary, asynchronous; 1 start bit; 1 stop bit; 8 data bits; no parity
Interface Type: Optically isolated 20mA current loop
Operation: Half-duplex transmission
Distance: Variable from 200 to 3000 feet (61 to 914 meters), depending upon wire capacitance
Typically 1000 feet (305 meters) using shielded twisted-pair wire, #26 AWG or larger
Extendable with an IQ Repeater
Control Port:
Connector: DB37M for analog inputs, digital inputs, digital outputs, +5VDC, +10VDC and Ground
Power Supply: +5VDC and +10VDC Outputs are provided. The total output current is limited to 1A
Outputs:
Logic Low: <0.1V
Logic High: 10V (via internal pull-up) Output Current is limited to 10mA max. per pin
Inputs:
Input Impedance: >50kohm
Logic Low: <0.5V
Logic High: >5V
Analogue Range: 0 to 10V (for inputs 9-16 only)
Max. Input Voltage: 25V
Protection: The unit will continue to function with the last commands received if communication is lost.
AC Power:
Connector: IEC320 connector for AC power cord
Power Requirements: 100VAC to 240VAC, 24VA nominal
Mechanical Installation:
Weight: 13 pounds, 4 ounces (6.1 kg)
Dimensions: 19 inch (483cm) standard rack mount width (EIA RS-310-B), 16-inch (40.6-cm) depth behind mounting surface, and
2 RU high (3.5-inches; 8.9-cm)
BSS Audio reserves the right to change product features and specifications without notice in the interests of product development. September 2001
BSS Audio USA
1449, Donelson Pike,
Nashville
TN37217 USA
Tel: +1 (615) 360 0277
Fax: +1 (615) 360 0480
BSS Audio UK
Cranborne House, Cranborne Road
Potters Bar, Hertfordshire
England, EN6 3JN
Tel +44 (0)1707 660667
Fax: +44 (0)1707 660755
A Division of Harman International Industries Ltd.
Retail Environments, Stadia
Auditoria, Houses of Worship,
Mass Transit Stations
Public Transportation
With ducking priority,
ambient level
compensation and event
scheduling, the PS-8810 is perfectly suited for
small and large transportation facilities.
PS-8810 Digital Signal Processor
Sports Facilities
With an staggering amount of signal processing and routing,
the PS-8810 offers the ability to use one common platform to
handle all of your system needs.
Restaurants/Bars/ Retails Stores
The PS-8810 can accomodate all of
the audio system requirements from
the most sophisticated dining audio
needs to store foreground,
background and paging needs.
Churches/Auditoriums
With full auto-mixing,
DSP signal processing and
external controls, the PS-
8810 gives the user the
control needed without
allowing all system
parameters to be
accessible.
(121 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals