BSS Audio FCS-960 User Manual download pdf (Page 6)

FCS-930/960

Mechanical Installation

A vertical rack space of 2U (3.5", 88.9mm) for the FCS-930, and 3U

(5.25", 133.4mm) for the FCS-960 is required. You must support the unit

at it’s rear by additional bracing or shelving if it is to be used in a

transportable system. Failure to do so will impair reliability and

invalidate the Warranty. Figure 1 details the relevant dimensions and

fixing centres. Adequate ventilation must be provided for by allowing

sufficient room around the sides and rear of the unit to ensure free

circulation of air. Forced cooling is not required. The front of the unit

should not be exposed to long term direct sunlight as this can have a

detrimental long term effect on the control knobs.

The internal power supply transformer is mounted on the case rear. After

a period of time in an enclosure, the metal case will feel hot to the

touch, but this is quite normal and should not be a cause for alarm.

3.0 Mechanical Installation

Fig. 1 Mechanical

Dimensions

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

No comments

BSS Audio FCS-960 User Manual Page 6