BSS Audio FDS 355 Specifications download pdf (Page 16)

Front Panel Other Controls

STORE/ENTER and RECALL

Used to store edited Programs to a new memory location and to recall saved setups

from the internal memories.

To select a preconfigured Program press the RECALL button on the front panel.

From new the Minidrive does not contain any preset Programs but, if the unit has

been used before it may contain user preprogrammed setups. Use the up/down

buttons located on the left side of the LCD screen to choose the correct Program.

Press RECALL again to enable the Program.

The STORE key is also used as an Enter button to confirm certain operations.

Pressing the STORE key when in recall mode will exit the operation and pressing

RECALL in a store operation will achieve the same result.

Other Controls

Mute buttons

Press any of the front panel Mute keys to toggle the channel in and out of mute.

The button will light red when the output is muted.

Mute button

Output trim controls

There are six output level trim controls on the FDS-336 and four on the FDS-334.

These knobs perform a dual function; as rotary controls they trim the channel

output level and if pressed, they activate the edit mode for that particular Output

channel. The output level trims from -6 to +6dB and has a centre detente at 0dB.

Output trim

control

Input and Utilities selection buttons

These four buttons select edit mode for the Input parameters

and the Minidrive Utilities screens.

Mode select buttons

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

No comments

BSS Audio FDS 355 Specifications Page 16