BSS Audio FDS 355 Specifications download pdf (Page 32)

MIDI Operation

MIDI Channel Number (1-16)

MIDI is used to transmit and receive Program changes and to transmit system exclusive dump

data between units. Use the < and > keys or rotary encoder to adjust the channel number from

1 to 16. Both sending and receiving equipment needs to be set to the same MIDI channel to

communicate correctly.

MIDI Mode (OFF, PROGRAM, MASTER, THRU, PC PORT)

This mode sets the type of information the FDS-334/336 transmits on its MIDI out socket, and is

dependent on the use of the FDS-334/336 in the system. The possible selections are:

OFF

No MIDI messages, except systems exclusive dumps, are transmitted.

PROGRAM (Prog)

Enables the unit to transmit MIDI program changes.

MASTER

Enables transmission of all control changes to other devices on the same MIDI channel - for

example to run two FDS-334/336s in parallel for stereo applications.

THRU

Allows the throughput of data received at the MIDI in socket to the MIDI out, i.e. a soft thru

with merge from input, (as required by the BSS MIDI network used in the control systems).

Utilities MIDI Operation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

No comments

BSS Audio FDS 355 Specifications Page 32