BSS Audio FDS 355 Specifications download pdf (Page 34)

Input Mode

There are three input sections: Input A, Input B and Input Sum (A+B). Delay and EQ can be

added to Inputs A, B and stereo linked A&B but only delay is available directly to the Sum A+B.

Input B Delay when in Mono mode

Input A+B Sum Delay

The input sum of A+B only has a Delay value to edit.

Stereo mode

Inputs A and B Stereo linked

When Inputs are Stereo linked in the Utilities section both Input A and Input B parameters are

ganged.

Inputs Delay

Input Delay

Delay is available from 0 - 635ms in 21 µs increments for Input A, Input B and Input A+B.

There cannot be more than 635.417 ms of delay on any input to output path.

Delay units to represent this value, as either milliseconds, metres, feet or frames per second, are

set in the Utilities section - press the UTILS button from any Delay screen to access this.

Inputs EQ

Input EQ

Inputs A, B (and A&B) can have EQ assigned to them. High and low shelving with 12dB or

6dB/octave slopes as well as full parametric bell curves are available. To add EQ to Input Sum

A+B, adjust EQ parameters on the individual unmixed inputs (A, B) which are then summed

into Input A+B.

See the section on Assignable EQ for more information.

Inputs Mode

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

No comments

BSS Audio FDS 355 Specifications Page 34